|
Petroleum Synthetic Ethanol
CAS 64-17-5 (Ethylene hydration)
|
Bio-Ethanol (HARSIL Bio)
CAS 64-17-5 (Absolute / 96%)
|
Sugarcane molasses / Agro-grain fermentation |
78.3°C Identical evaporation rate |
100% Exact Match Ra = 0.0 |
True Drop-in Replacement: Exact molecular structure. Requires zero process re-validation or equipment modification. Available in analytical and electronic grades.
|
|
Dichloromethane (DCM)
CAS 75-09-2 (Chlorinated hydrocarbon)
|
2-Methyltetrahydrofuran (2-MeTHF)
CAS 96-47-9 (Bio-Ether)
|
Furfural from corn cobs and oat hulls |
80.2°C vs 39.6°C Drastically lower volatility |
High Parity Excellent for organic phases |
Extraction & Reaction Benefits: Eliminates halogenated waste disposal costs. Significantly lower water solubility enables clean biphasic separation without emulsification.
|
|
Tetrahydrofuran (THF)
CAS 109-99-9 (Fossil 1,4-butanediol)
|
2-MeTHF / CPME Alternate
Bio-derived cyclic ether
|
Renewable agricultural biomass |
80.2°C vs 66.0°C Higher reflux threshold |
Very Close Lewis base coordination |
Higher Reaction Temperatures: Allows reactions to run ~14°C hotter for accelerated reaction kinetics. Higher resistance to dangerous peroxide accumulation.
|
|
Toluene / Xylene
CAS 108-88-3 (Aromatic VOC)
|
Ethyl Lactate / Bio-Esters
CAS 97-64-3 (Lactic acid ester)
|
Natural corn/starch fermentation |
154°C vs 110.6°C Higher flash point (46°C vs 4°C) |
Modified Dipole High solvency for polymers |
Fire Safety & VOC Control: Dramatically reduced flammability risks. Note: Requires prolonged drying cycle or heat due to higher boiling point.
|
|
DMF / NMP / DMAC
CAS 68-12-2 / 872-50-4 (REACH SVHC)
|
Specialty Bio-Ester Formulations
High-polar bio-alternatives
|
Carbohydrate & glycerol derivatives |
Custom High-Boiling Engineered low volatility |
Application-Specific Requires screening |
Regulatory Sunset Protection: Designed to replace reproductive toxins subject to European and global chemical restrictions in peptide and resin processing.
|